VT Group of Companies: Acacia Engineering, VerdaTech Energy Management and Consulting, QualiSTAT Building Performance Consultants and Next Level ConsultingA member of the VT Group of Companies

Home / Guides / Apartment retrofit financing

FINANCING GUIDE · MULTI-UNIT BUILDINGS

Apartment building retrofit financing in Ontario: the federal programs explained

On October 8, 2026, the federal government announced financing to retrofit 280,000 apartment units over eight years. Unlike the new household heat pump rebate, this money depends on proving how much energy your building will save.

THE SHORT ANSWER

  • 280,000 apartment units are targeted for retrofit financing over the next eight years.
  • Two main routes: Canada Mortgage and Housing Corporation (CMHC) multi-unit mortgage loan insurance, including MLI Select (up to 250,000 units), and the Canada Infrastructure Bank Building Retrofits Initiative (30,000 units).
  • Measured savings decide the terms: a credible baseline and energy model come first.

Three federal programs for apartment owners

ProgramRun byWhat it offersUnits targeted
Multi-unit mortgage loan insurance, including MLI SelectCanada Mortgage and Housing CorporationBetter insured financing for buildings that cut energy use: longer amortization, higher loan-to-value and lower premiumsUp to 250,000
Building Retrofits InitiativeCanada Infrastructure BankFinancing for retrofit capital costs in apartment and multi-unit buildings30,000
Deep Retrofit Accelerator Initiative (renewed)Government of CanadaSupport for owners through every stage of a retrofitNot unit-based

CMHC has changed MLI Select scoring before, so confirm current thresholds with your lender before planning around them. Estimate your points with our MLI Select calculator.

Why measured savings decide your financing

Your financing terms rest on numbers someone has to measure, model and stand behind:

  • A measured baseline. Utility bills hide where the energy goes. System-level data shows the real starting point.
  • A defensible energy model. The model sets the reduction tier you can reach, and lenders review it.
  • Verified results. After the retrofit, measured performance is compared with the baseline, adjusted for weather and occupancy.
  • Savings that last. In occupied buildings, savings drift as setpoints get overridden and sensors fail. Ongoing monitoring catches it.

Your roadmap, from baseline to verified savings

  1. Benchmark the building against similar Ontario buildings and collect metered data.
  2. Audit and model with an ASHRAE Level 2 energy audit and an energy model that sets your target tier.
  3. Choose the financing route (CMHC, the Canada Infrastructure Bank, or both) and assemble the application with your lender.
  4. Design and tender the retrofit: heat pumps, ventilation, envelope and controls, with competitive quotes.
  5. Measure and verify post-retrofit performance against the baseline and report to the lender.
  6. Keep the savings with ongoing monitoring.

Stack provincial, utility and city programs

Federal financing can sit alongside Save on Energy and Enbridge Gas incentives and, in Toronto, the City's Energy Retrofit Loans. See every current program in our Ontario rebate tracker, or read about energy audits for condos and rental buildings.

Sources: Prime Minister's announcement, October 8, 2026 · CMHC: MLI Select.

Quick answers

What financing is available for apartment building retrofits?

The federal plan targets 280,000 units over eight years: up to 250,000 through CMHC multi-unit mortgage loan insurance, including MLI Select, and 30,000 through the Canada Infrastructure Bank Building Retrofits Initiative. The renewed Deep Retrofit Accelerator Initiative supports owners through each stage.

Do I need an energy audit for apartment retrofit financing?

For MLI Select energy points, yes: CMHC relies on a professional energy assessment and energy model showing the reduction against the building's baseline. This differs from the new household heat pump rebate, which needs no energy audit.

What is measurement and verification?

Measurement and verification compares a building's measured energy use after a retrofit with its baseline, adjusted for weather and occupancy, to show the savings are real. Lenders rely on it to confirm the project performed as modelled.

When should I start?

Now. A credible baseline takes time to collect, and owners who apply early are best placed while program capacity is available.

  • Engineers and Certified Energy Managers
  • Registered Energy Advisors (Natural Resources Canada)
  • 4.9★ on Google · 186 reviews
  • Based in Aurora · serving buildings across Canada since 2020
  • Authorized partner of Peak Energy

KEEP READING

More guides